August posts from the old blog

Friday, 29 August 2014

CK253

CK253 Rear stand only for Harley 1912 – 1916 singles and twins.
Listed new in 1912 as a spare part at $2.00 but by October 1923 was $2.50.
I just paid $400 plus shipping for this repop stand.  I have compared it to an original I have on a ’15 and I have another on a ’13.  The form it’s made out of is quite difficult to copy and the alignment angles need some work.  The sides need to be filled with shaped bar but it has been made well and isn’t covered in MIG or TIG welds like so many parts are these days.  Nice part.
 
 
 

Wednesday, 27 August 2014

Mag-dyno

Rarer than hen’s teeth.  Magneto-dynamo for 1915 and 1916 Electric models.
Will fit some later versions as well.  Has 45 mm shaft height like the Bosch ZEV.
It’s a very interesting part but didn’t last for long.
 
 

Monday, 25 August 2014

Wiring tidy up.

Nightmare wiring in the Hippy Indian.
 
Nice little wiring loom from Moen at IPE in Denmark.
You can also see the left hand shifter installed now.

Tuesday, 19 August 2014

1948 Hippy Indian

I’ve got the Indian in the workshop now.  Bought as a runner a month ago but you know the story.
She won’t need much though, a re-wire, new sealed beam and some bulbs, swap the gas and timing controls over and then fit a left hand shifter.
Indian Chiefs – I love em.
 

1913 all blinged up.

All blinged up but it’s not easy finding era correct parts like these.
 
Can’t fault the finish on the headlamp, great Handphone horn and fully connected Prestolite gas cylinder for the lights.
A better view of the Prestolite and the brass head Corbin speedometer.
 
Rack is correct for 16 and later but not 13.  The length needed to be altered to make it fit.
Very useful for rain gear and spare fuel; the tank only holds one gallon (UK).
Very rare Fidelity rear gas light but I need to do a better job with the number plate.
 
Super rare A-K front wheel lock.  Era correct, I’ve never seen another one.
Perfect matching tax disc holder came of a 1914 Triumph.

JD rear band brake

I keep seeing this JD band brake on US eBay.  Its a nice part and they don’t come up often but at $250 all in, it might just sit on the shelf forever.  I’ve seen better for less money and it needs relining and some repair.
But it is a nice part……..
 

Thor rear hub

This is the rear hub on my 1913 Harley.
Its by Thor, has a coaster brake inside the hub and a clutch by Freewheel.
All the parts on the far side are the Corbin speedometer ring gear and fittings.
 1913_9B_014
And this is a pattern copy of the same part.  It will go on my 12 twin.  It’s almost a complete unit.  I just need to make a couple of spacers and sort out a cover for the oiler.
 

What the finished 16J might look like

If I put a Remy mag-dyno on the 16 then she will end up like this.  Battery under the seat, electrics box on the Remy, plus the electric options.
That’s a tool box on the gas tank.  Very nice job by someone.
 
A better view of the electric horn and front light. Nice correct tool box as well.

1916 Harley Davidson 16F

This is the 16F; the magneto version of the 16J.  Its exactly the same bike as the J but without the Remy mag-dyno and the electric lights and horn.

This is a very ride-able bike, three speed (second year) and a proper kick starter (first year).
It’s also got a ‘proper’ brake rather than the earlier coaster type.
 
This particular machine was restored by Antique Bike in Sweden.

1916 Harley Davidson 16J


This is an interesting project that has just come in;  Fresh from California via Felixstowe.
Its a 1916 Harley Davidson model J.  This (J) is the electric model with electric lighting via a generator and an electric horn.  The F came with just a magneto for ignition, the J had a mag-dyno to do the ignition and lighting jobs.  This was the second year of the electric model.This is a great project with loads of extra parts including spare carbs, clutches, tanks (including one with original paint) AND a year correct side car (16L).
I’ve started ordering up all the missing parts and will either complete the project and sell as a running bike or find the missing parts and sell it as a complete project.I just need to decide whether to go with the original Remy mag-dyno; very rare but somewhat unreliable or to fit a ZEV magneto; not so rare and can’t run the electric options but much more reliable.Fitting the mag only is what they did back in the days when the Remy used to fail.
 
 
 

Vincent for sale.

Vincent for sale

 

Monday, 18 August 2014

Assorted knuckleheads

Can you have too much of a good thing?
From the left, stocker, bobber, chopper.
 
  

The Indians are coming (and going).

I restored this 348 a couple of years ago now.  A lovely bike from Holland.  She was hand painted blue when I got her but I matched the original paint, lovely Indian Red, on the underside of the fenders and it came out really well.  I also had to swap the throttle and ignition hand spirals (throttle was originally on the left side) and convert the hand shift from the right side of the tank to the left.
She went to a really nice bloke call Scott and as far a I know he still has her.
 
This black and red basket came in last year from an old friend in Tacoma, Washington and was a quick turn around – sold as a non running project. All there, lovely Flanders bars and Beck grips.
This one is a recent arrival and in the workshop now.  Sold as a runner but guess what?
I’ll keep the hippy chic finish and get her running right before she leaves.

 

1908 Excelsior

This was an interesting project but it was never finished.  I bought it from old friend Zeke Rhodes in Colorado.  The top two picture come from Steve Wrights book, they show what the model was originally like.  The next two show the actual bike, but an offer made ‘mid project’ meant that she was sold uncompleted.
I never found out how she finished up.
 
  

1910 Thor

I bought this as someone else’s unfinished project.  She was mainly all there baring the very hard to find Hedstrom carb and manifold (plus the usual small bits).
We fitted a very early, pre-tickler, Schebler carb and there is a film on YouTube of her starting up for the first time in donkey’s years.  Loads of smoke, Kevin pedalling like a lunatic and almost having a seizure,
me laughing my head off.  So much for health and Safety!
 

Jones 50 mph speedometer

Lovely rare teens 50 mph Jones speedometer came on the 8X but its another job that needs doing.
Luckily the speedo head doesn’t need repair but the cable does.  It’s fiddly but should be repairable otherwise I will need to fashion a complete new cable and then attach the ends.
 
 

It really is a lovely part.  But again I have a spare so the owner won’t need to worry about speeding tickets!

Persons seat repair

I just got this 12 single in.  The seat is torn and needs repairing.  I have a spare; exactly the same barring the name tag, so the bike will still be ride-able.  It shouldn’t take long after I get the patch sorted.

 
 

A patch cut out to support the centre and then cut to expose the diamonds down the spine.  Then glued to join the split and attach the patch, job done.

 

1913 parts help wanted

I got this message from Denny who is looking for some parts, maybe someone can help.

Hi Ian, I am searching for parts for my 1913 Harley Single belt
drive. I am searching for a usable rear wheel assy and right side
gas tank. I am not restoring this bike just getting it driving again, so the parts don’t have to be in real good shape just usable or repairable. My bike has no paint at all and very little nickel left and I only plan to oil it to preserve it not a full restore so new parts will not look right with the rest of the finish. may have to buy
new and try to rust the new parts.
Maybe someone knows a source. Thank You for the help!

Denny

walser@newulmtel.net

Denny

walser@newulmtel.net

1916J on Ebay

This 1916J Electric has just sold on EBay.com

http://www.ebay.com/itm/1916-Harley-Davidson-/151497361498?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2047675.l2557&nma=true&si=%252FS8BR1aAL0VRZ2%252FsaZok7r24C9w%253D&orig_cvip=true&rt=nc

Wrong fenders and seat, missing the very hard to find magdyno, electrics box and electric rear light.
As well as other small parts, exhaust, linkages, etc.

It’s too late for our Pioneer events in the UK and also the Pre 16 events in the US and it still made over $21k.
It’s because they are such a great machine to ride.

1916 Harley Davidson 16J

$(KGrHqJHJEkFJ44i9q1JBSfnn03lw!~~60_57 - Copy  $(KGrHqJ,!n0FJsvbSV7uBSfnsGVOgw~~60_57

This is an interesting project that has just come in;  Fresh from California via Felixstowe

Its a 1916 Harley Davidson model J.  This (J) is the electric model with electric lighting via a generator and an electric horn.  The F came with just a magneto for ignition, the J had a mag-dyno to do the ignition and lighting jobs.  This was the second year of the electric model.

This is a great project with loads of extra parts including spare carbs, clutches, tanks (including one with original paint) AND a year correct side car (16L).

I’ve started ordering up all the missing parts and will either complete the project and sell as a running bike or find the missing parts and sell it as a complete project.

I just need to decide whether to go with the original Remy mag-dyno; very rare but somewhat unreliable or to fit a ZEV magneto; not so rare and can’t run the electric options but much more reliable.

Fitting the mag only is what they did back in the days when the Remy used to fail.

1 18 19 20 21